-
Confessions of a New Corporate Pilot
by
No Comments
In the Citation III Confessions of a New Corporate Pilot
Life would be sweet, I thought, now that I’d successfully passed my Cessna Citation III (CE-650) type rating check ride (this was a few years back). It meant I’d be flying my first swept-wing jet. Surprisingly, my first day at the new job at Chicago Executive Airport (PWK) would also be the first time I’d been up close to a real Citation III since all the training and even my check ride happened in FlightSafety’s full-motion simulator.
From my research, though, I knew the 650’s cabin was roomy enough for eight, and its rocket-like performance was nothing short of spectacular with a VMO (maximum operating Mach) of Mach 0.85 and 39,000 feet on a standard day. In its day, M.83 was pretty fast. That meant we could make the West Coast out of PWK with four people in the back. I learned quickly, too, that the 650’s awesome performance meant I needed to stay much farther ahead of the airplane than I’d had to in the much slower Citation II (CE-550) I’d been flying in a 12-pilot charter department.
A privately held corporation owned this Citation III and I was the junior of three pilots. The chief pilot, my new boss, brought experience from several other flight departments, while the other pilot, I’ll call him Tom well, I was never really too sure where Tom had come from because the guy kept to himself as much as possible and wasn’t the chatty type. That made three-hour flights long when the entire conversation at FL390 ended with an occasional shrug of the shoulders.
But who cared what one guy acted like, I thought. I was there to learn how to fit into a flight department that needed another pilot on their team. Just like in charter flying, my job was to keep the people in the back happy. I came to know these passengers much better than we ever did in the charter world. These folks sometimes invited the flight crew to their home on Nantucket when we overnighted there.
The Interview
Looking back on this job now though, I guess the 10-minute interview the chief pilot and I engaged in before he offered me the job should have been a tip-off that maybe something was a little odd. But with a four-year-old daughter growing up at home, the chance to dump my charter department pager that always seemed to ring at 2 a.m. beckoned hypnotically.
Cessna Citation CE-650 Corporate line training began right away with me flying in all kinds of weather, where I regularly rotated flying left seat with the chief pilot and Tom. Having flown left seat on the Citation II, I wasn’t brand new to jets, just speedy ones.
After a few months, however, I began to notice a few operational oddities that started making me a little uncomfortable. Some sketchy flight planning and questions I asked were sometimes answered with annoyed expressions. If I appeared not to agree, someone might ask if I’d finished all the Jepp revisions (In those days there were no electronic subscriptions. Updates were handled by hand). I found the best solution for getting along seemed to be to just shut up and fly the airplane. Ignoring those distractions did help me pay closer attention to the little things that made my flying the jet smoother.
Then again … On one flight back from Cincinnati (CVG), I was flying left-seat with the chief pilot in the right. I wanted to add fuel before we left since the Chicago weather was questionable, but the boss overruled me explaining, “We’re fat on fuel.”I didn’t say anything. As we approached PWK, the ATIS reported the weather had worsened, considerably. The Swiss cheese holes began to align when Chicago Approach dumped us early. We ended up burning more fuel than planned. I flew the ILS right down to minimums, but my scan uncomfortably included the fuel gauges every few seconds. After a safe landing, we taxied in with 700 pounds of Jet-A, not much for an airplane that burns 1,800 pounds an hour down low. What if we’d missed at Chicago Executive Airport and needed to run for Chicago’s O’Hare International Airport I wondered? We’d have arrived on fumes. The boss looked at me after we shut down. “Don’t tell me that whole thing bothered you. It all turned out fine, didn’t it?” (more…)
-
Remembering Gordon Baxter: Bax Seat was a Flying Magazine Reader Favorite
by
No Comments
(Reposted by request)
Each time I stand near my desk, my eyes naturally focus on the framed cover of the August 1983 Flying magazine. Below it is page 100, the “I Learned About Flying from That” (ILAFFT), where my first column appeared. On it, the author of Bax Seat, scrawled in brown ink, “To my friend Rob Mark. His story, my push. Gordon Baxter, August 5, 1983.”
Many months before, Gordon Baxter had given me the Flying editor’s phone number. When I rang with my brief pitch, all I heard was “yes.” I suddenly had an assignment for my first column. That 1983 issue was the first, but not the last, time my name and stories appeared in the aviation industry’s iconic magazine. That same issue also ran a pilot report about the then-new Cessna Citation III, an aircraft I later added to my list of type ratings. Looking back, there were so many aspects of my aviation career that came to life around Bax and that August 1983 issue, not the least of which was that we became friends.
Gordon Baxter, Bax as he preferred folks call him, helped shape my career as an aviation journalist like no one before him and only a few people since. The author of 13 books, Bax’s own magazine writing career at Flying spanned 25 years. His monthly column, Bax Seat, focused on vivid descriptions of his adventures. It was known simply as “Bax Seat.” Did I mention he was also a long-time radio personality in Beaumont, Texas, another interest we shared.
A Bit of Bax’s Background
I first met Bax in the mid-1970s. He brought his show, his act, or whatever the heck he called his evening of storytelling, to the Stick and Rudder Flying Club at Waukegan Airport. I was a tower controller not far away at Palwaukee Airport. Having been an avid Flying reader since high school, I switched shifts with another controller so I wouldn’t miss the event. Bax captured the audience for over an hour with stories from his flying career and his columns that often alternately “em rollin’ in the aisles” with gut-wrenching laughter and an emotional Texas-guy style that also brought tears to many an eye. Another way to think of Bax’s storytelling night was like an evening of improv but all about flying and airplanes.
Born in Port Arthur, Texas, he learned to fly after World War II following his stint as a B-17 turret gunner. Bax was no professional pilot—just a guy with a private certificate, an instrument rating, and eventually his beloved Mooney. On the back cover of one of his books, appropriately titled Bax Seat, Flying’s Stephan Wilkinson said “Bax tries to pass himself off as a pilot, but don’t believe him. He never could fly worth a damn. But Gordon feels airplanes, loves and honors them in ways that the rest of us are ashamed to admit. And he’s certainly one of the few romantics who can express what he feels so perfectly.” I couldn’t have written that myself, but I, too, felt it.
(more…) -
Making the Brazilian ATR-72 Spin
by
No Comments
Note: This story was corrected on August 10th at 10:23 am, thanks to the help of a sharp-eyed reader.
Making an ATR-72 Spin
I wasn’t in Brazil on Friday afternoon, but I saw the post on Twitter or X (or whatever you call it) showing a Brazil ATR-72, Voepass Airlines flight 2283, rotating in a spin as it plunged to the ground near Sao Paulo from its 17,000-foot cruising altitude. All 61 people aboard perished in the ensuing crash and fire. A timeline from FlightRadar 24 indicates that the fall only lasted about a minute, so the aircraft was clearly out of control. Industry research shows Loss of Control in Flight (LOCI) continues to be responsible for more fatalities worldwide than any other kind of aircraft accident.
The big question is why the crew lost control of this airplane. The ADS-B data from FlightRadar 24 does offer a couple of possible clues. The ATR’s speed declined during the descent rather than increased, which means the aircraft’s wing was probably stalled. The ATR’s airfoil had exceeded its critical angle of attack and lacked sufficient lift to remain airborne. Add to this the rotation observed, and the only answer is a spin.
Can a Large Airplane Spin?
The simple answer is yes. If you induce rotation to almost any aircraft while the wing is stalled, it can spin, even an aircraft as large as the ATR-72. By the way, the largest of the ATR models, the 600, weighs nearly 51,000 pounds.
Of course, investigators will ask why the ATR’s wing was stalled. It could have been related to a failed engine or ice on the wings or tailplane. (more…)
-
How the FAA Let Remote Tower Technology Slip Right Through Its Fingers
by
No Comments
In June 2023, the FAA published a 167-page document outlining the agency’s desire to replace dozens of 40-year-old airport control towers with new environmentally friendly brick-and-mortar structures. These towers are, of course, where hundreds of air traffic controllers ply their trade … ensuring the aircraft within their local airspace are safely separated from each other during landing and takeoff.
The FAA’s report was part of President Biden’s Infrastructure Investment and Jobs Act enacted on November 15, 2021. That bill set aside a whopping $25 billion spread across five years to cover the cost of replacing those aging towers. The agency said it considered a number of alternatives about how to spend that $5 billion each year, rather than on brick and mortar buildings.
One alternative addressed only briefly before rejecting it was a relatively new concept called a Remote Tower, originally created by Saab in Europe in partnership with the Virginia-based VSATSLab Inc. The European technology giant has been successfully running Remote Towers in place of the traditional buildings in Europe for almost 10 years. One of Saab’s more well-known Remote Tower sites is at London City Airport. London also plans to create a virtual backup ATC facility at London Heathrow, the busiest airport in Europe.
A remote tower and its associated technology replace the traditional 60-70 foot glass domed control tower building you might see at your local airport, but it doesn’t eliminate any human air traffic controllers or their roles in keeping aircraft separated.
Max Trescott photo Inside a Remote Tower Operation
In place of a normal control tower building, the airport erects a small steel tower or even an 8-inch diameter pole perhaps 20-40 feet high, similar to a radio or cell phone tower. Dozens of high-definition cameras are attached to the new Remote Tower’s structure, each aimed at an arrival or departure path, as well as various ramps around the airport.
Using HD cameras, controllers can zoom in on any given point within the camera’s range, say an aircraft on final approach. The only way to accomplish that in a control tower today is if the controller picks up a pair of binoculars. The HD cameras also offer infrared capabilities to allow for better-than-human visuals, especially during bad weather or at night.
The next step in constructing a remote tower is locating the control room where the video feeds will terminate. Instead of the round glass room perched atop a standard control tower, imagine a semi-circular room located at ground level. Inside that room, the walls are lined with 14, 55-inch high-definition video screens hung next to each other with the wider portion of the screen running top to bottom.
After connecting the video feeds, the compression technology manages to consolidate 360 degrees of viewing area into a 220-degree spread across the video screens. That creates essentially the same view of the entire airport that a controller would normally see out the windows of the tower cab without the need to move their head more than 220 degrees. Another Remote Tower benefit is that each aircraft within visual range can be tagged with that aircraft’s tail number, just as it might if the controller were looking at a radar screen. (more…)
-
Flying a Seaplane
by
No Comments
The classroom was a 150 hp PA-12 Super Cruiser on floats How many times during an airline pre-takeoff briefing have you heard the flight attendant say, “In the event of a water landing …”
Trust me, there ain’t no such thing as a water landing in an airplane with traditional landing gear.
An airplane touching down on the water is a crash plain and simple … EXCEPT, when you’re learning to fly a seaplane like I did last week. My instructor, Tom Brady at Traverse Air near KTVC, probably thought there were a few times when my efforts were a bit crash like, but luckily I improved enough to pass the checkride a few days after we started. Not bad for an old guy.
Not much need to look at the panel very often I first became fascinated with the idea of these aircraft after visiting a seaplane mecca a few years ago in Vancouver where I spent the afternoon watching floatplanes of all sizes come and go. Then a local Jetwhine reader here in Chicago, Dave Montgomery, offered up some encouraging nudges until I knew I needed to make room for this in my schedule. Last week I did with my friend Matt Desch. We arrived in TVC for five hours of training in this PA-12 Super Cruiser. For a guy who’s become pretty comfortable with a glass cockpit, this was a pretty simple airplane to work with. A stick, a throttle and a couple of basic instruments. We never did turn on the radio.
Before the first lesson, CFI Tom Brady mentioned that Matt and I would never again look at water the same way. That turned out to be true. The preflight alone was different … especially for a guy like me who can’t swim.
We learned there’s a difference between glassy water and the surface when there’s even just a minor wind. Who would have thought taking off and landing on glassy water was actually more challenging than when there’s a breeze? Plow taxiing now makes sense, as does realizing when the airplane’s on the step. We learned how to take off from a confined space … seaplane talk for a short field. Water rudders? I thought those were a bit like water wings at first, but I learned when to use them and when to make sure I retracted them. Finally, there came the realization that when the engine quits on a seaplane, those floats add more drag than even I was prepared for at first. This is all the book learning part of course.
-
Aviation Writers I Read
by
No Comments
/
RSS FeedNote to the World’s Best Readers / Listeners – You now have the option to listen to the Aviation Minute podcast or read the text below. If you receive Jetwhine via e-mail, you can click here to listen as well.
I wouldn’t be much of an aviation writer if I didn’t read. And I don’t think you can be much of an aviation enthusiast if you don’t read either, so I do my part by strumming through a bunch of aviation magazines, online pubs and a couple of newspapers each week to stay in touch with the industry. Here are some of the folks I read, no matter what they write. You’ll also find most of them on Twitter.
I’ve known most of them for years so trust me, if you have the opportunity to say hi at a show when you see them, don’t be shy. They all like to schmooze about the industry no matter where you come from … except maybe for helicopters. I’m not sure they count since we all really know those things fly using wires and magic anyway.
author with Dan Webb (C) & Jon Ostrower (R) at MDW Jon Ostrower – The Wall Street Journal – I first learned about Jon when he started writing his 787 blog. Right from the start I realized he had a flare for digging deep for the inside details on every single issue relevant to the extra years it took Boeing to kick that new bird of theirs out the door. He spent a few years at Flight Global before heading out the door to DC to work for the WSJ. There’s even a pic around the net somewhere of Jon at his first AirVenture sporting a Jetwhine button. I have to find that one. @jonostrower
Molly McMillian – The Wichita Eagle – Molly’s one of the few working journalists who still covers aviation for a general readership newspaper, The Wichita Eagle. Really nice, smart lady. Find her on Twitter @mmcmillin
Matt Thurber – Aviation International News & Business Jet Traveler – Matt’s a versatile writer, pilot and even an A&P technician so he’s the guy I go to with nuts and bolts questions when I get stuck. And the guy writes 24 hours a day I think since his byline is everywhere.
Tom Haines – AOPA Pilot’s – Tom’s the soft spoken editor of AOPA Pilot magazine and the guy who gets to file some of the coolest pilot reports around, so I’m extremely envious. Despite the fact that he flies a Bonanza rather than a Cirrus, I still respect him a bunch. He also hosts AOPA Live, every week, another cool job. @tomhaines29
Flying’s Pia Bergquist Pia Bergqvist – Flying – I remember back in the old days when Pia worked in PR at Cessna. She gave me my first demo ride in a Cessna Corvalis before she moved on to Flying magazine. She loves the Cirrus like I do and there is no truth to the rumor that I only admire her because she’s Swedish. I’m half on my dad’s side. @piapilot
John Croft – Aviation Week – John’s Av Week’s safety geek so we see eye to eye on many things in this industry, although AvWeek gives him way more space each week to write than I do at AINSafety … not that I’m complaining Charlie, just comparing. We actually met up at a safety conference in DC some years back when he introduced himself only by his Twitter handle, @avweekjc
Mike Collins – AOPA Pilot’s Technical Editor – Mike earned my undying admiration when he came to Chicago a few years ago to shoot the photos for an AOPA Pilot story I wrote about flying the L-39 at Gauntlet Warbirds at KARR. We flew in January and Mike spent half a morning hanging out of the back of a T-6 shooting the photos. The way he was dressed, he looked like a big bear at the back end of that airplane. He also climbed on board an MU-2 for a quick ride around the world earlier this year. What a guy. (more…)
-
The Bottom Line on Airline Reclining Rage
by
No Comments
There are many ways to look at the recent spate of passenger confrontations resulting from one reclining into the knees and face of another. The confrontations have been occurring for years, ever since the airline MBAs started shrinking the seat pitch, the distance between rows, and width. They are news now because the stories are sensational and easy to report, and they seem to be more common because flight crews are tired of dealing with these confrontations, so they are resolving them with unscheduled landings, which shares the physical pain with everyone on board and the economic pain with everyone who flies the airlines.
Others, such as the New York Times, has examined one of the underlying causes of airline reclining rage. “The Problem With Reclining Airplane Seat Design” provides the specifics on what any airline passenger has known for years: today’s airline seats are not designed to accommodate the full range of human dimensions. It introduces us to Dr. Kathleen Robinette, an Oklahoma State University professor who was the lead author of 2002’s Civilian American and European Surface Anthropometry Resource. A U.S. Air Force project conducted with a consortium of 35 organizations, it measured the bodies of 4,431 people in America, the Netherlands, and Italy.
The report has become the go-to source for seat designers who, the article said, assume that their designs will accommodate almost everyone if they dimension it for a man in the 95th percentile. Being vertically over endowed, I’m in the 5 percent the designers exclude, in league with women. While seats short me in leg room, females are shorted on width. Collecting dimensions from the world’s airlines, SeatGuru.com shows that the average airline seat is 17-18 inches wide, adequate for the 17.15-inch span of the 95th percentile North American male. The 95th percentile North American female measures 19.72 inches. Exacerbating the airline space conflict is the reality that the shoulder width of most humans is greater than their hips.
